Impact Of Jets On Vanes Apparatus:
Description:
The closed circuit Impact of Jet on Vane apparatus consisting of MS Nozzle housing glass tube of Ø250 x 300 mm Height MS Nozzle fitted in a transparent casing with mechanism to measure the force due to the impact of jet of water on vanes, in Kgm units and having brackets to receive interchangeable vanes of different types.
Specifications:
1. Sump Tank Size: 800 X 400 X 400 mm
2.Collecting Tank Size : 300 X 300 X 500 mm capacity to measure the discharge water from the unit, provided with a gauge glass, scale arrangement and a 02″ drain valve
3. Coll. & Sump Tank Material : SS 304 Grade
4. MS Frame : Ms Frame should be made of 40mm x 5mm MS angle.
5. Size of the Frame : 1200 X 450 X 500 mm.
6. Nozzle Size : 10mm & 12mm
7. Nozzle Material : Brass
8. No. of Vanes : 03 Nos. (Flat, Inclined & 180° Curved vane)
9. Force Measurement : by 05 Kg. Weighing Scale
10. Nozzle Housing : Stainless Steel Housing with one side transparent casing having provision to interchange the vanes.
11. Pump : 01 HP Mono block Pump
12. Pump Head : 35 Meter Head
13. Control Valve : 01″ Brass/Gun metal Valve
14. Piping System : 01″ UPVC Piping system
15. Drain Valve : ½ ” Brass Valve
16. Power Switch : 32A DP Switch
Rigid MS framework compactly fitted with all the above items as a self-sufficient package unit, suitable for operation without any foundation.
Performance Test on Pelton Wheel Turbine:
FLOW MEASURING UNIT:
1. Size of Venturimeter : 50 mm
2. Pressure Gauge : 0 – 7 Kg/cm2 – 3 Nos
Description:
The Closed-Circuit Pelton Wheel Turbine test rig 50 mm pipe Size to develop 1 Kw with a flow of about 500 LPM at 25 meters supply head complete with rope brake arrangement, pressure gauge, two round type spring balances, etc., to conducting experiments in metric units.
Specifications:
Pelton wheel turbine test rig.
1. Rated Supply Head : 35 meters
2. Discharge : 500 lpm
3. Normal Speed : 1000 rpm
4. Power Output : 1 KW
5. No. of Buckets : 16 Nos.
6. Brake Drum Diameter : 200 mm
7. Rope Diameter : 15 mm
8. Speed Measurement: By RPM indicator
9. Sump Tank Size: 1250 X 700 X 500 mm.
10. Sump Tank Material: SS304
SUPPLY PUMPSET:
1. Rated Head: 35 meters
2. Discharge: 500 lpm
3. Power required: 5 HP, 3Ø, 440V, 50Hz.
4. Pipe Size: 65 mm x 50 mm
5. Type: High speed, Centrifugal Pump
6. Starter: DOL Starter
Rigid MS framework compactly fitted with all the above items as a self-sufficient package unit, suitable for operation without any foundation.
Francis Turbine Test Rig
Description:
The Closed-Circuit Francis Turbine 50 mm size to develop 1Kw with a flow of about 500 LPM at 25 meters supply head, complete with rope brake arrangement, pressure gauge, vacuum gauge, and two numbers of circular spring balances are provided to conduct the experiments in metric units.
Specifications:
Technical Parameters of Francis Turbine:
1. Rated Supply Head: 10 meters
2. Discharge : 1000 LPM
3. Rated Speed: 1250 RPM
4. Power Output : 1KW
5. Runaway Speed : 1750 RPM
6. Runner Diameter : 160 mm
7. No. of guide vanes : 10
8. P.C.D. guide vanes : 230 mm
9. Brake Drum Diameter : 300 mm
SUPPLY PUMPSET:
1. Rated Head: 15 meters
2. Discharge: 1000 lpm
3. Normal Speed: 2880 rpm
4. Power required: 5 HP, 3Ø, 440V, 50Hz.
5. Pipe Size: 75mm x 75 mm
6. Type: High speed, Centrifugal, single suction volute
7. Type: Centrifugal
8. Starter: DOL Starter, L&T Make
FLOW MEASURING UNIT:
1. Size of Orifice Meter : 50 mm
2. Throat Dia. :30mm
3. Pressure Gauge : 0 – 7 Kg/cm2 – 3 Nos
Rigid MS framework compactly fitted with all the above items as a self-sufficient package unit, suitable for operation without any foundation.
Performance Test on Kaplan Turbine Test Rig (1Kw Capacity):
Rigid MS framework compactly fitted with all the above items as a self-sufficient package unit, suitable for operation without any foundation.
Description:
Kaplan wheel turbine is an axial flow reaction turbine named in honor of Sir L Dr. B. Kaplan, a German Engineer.
Specifications:
The present set-up consists of a scroll casing housing a runner. The water is fed to the turbine, though the stationary guide vanes & passes though the runner axially. The runner has a hub & airfoil vanes, which are mounted on it. The water is fed to the turbine by means centrifugal pump. The runner is directly mounted on one end of a central SS shaft & other end is connected to a break arrangement. The transparent hollow cylinder made of acrylic is fitted in b/w the draught tube & the causing for observation of flow of on to the airfoil vanes. This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of this brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draught tube is fitted on the outlet of the turbine. The set up is complete with guide mechanism. Pressure & vacuum gauge is fitted at the inlet & outlet of the turbine to measure the total supply head to the turbine.
TECHNICAL DETAILS:
• Output power : 01 KW
• Discharge : 1000 LPM
• Supply Head : 5-8 m
• Speed : 1000rpm
• Dynamometer : Rope Break type
• Pressure measurement : Pressure gauge & vacuum gauge Piping & fitting : with flow control valves of suitable size
• Sump Tank : Capacity 200 ltrs.
• Water circulation-Centrifugal tank, standard make, capacity 5HP, 3 Phase.
• Discharge measurement : Orifice meter with pressure gauges
• Control panel comprise of L&T make starter, main indicator, MCB for overload protection.
• Tank will be made stainless steel, 304 grade
Single Stage Centrifugal Pump Test Rig
Description:
The Closed-Circuit Single Stage centrifugal (Monoblock) pump set of size 25mm, 1HP, single Phase, 230 VAC, 50 Hz. To discharge 200 LPM about 15 meters head for conducting experiments at a single speed for plotting the characteristics graphs.
1. Discharge Vs. Head
2. Discharge Vs. Input Power
3. Discharge Vs. Efficiency
Specifications:
1. Suction & Delivery Pipe: 25 ⨉ 25mm
2. Output: 4000 LPH
3. Suction Lift: 7 meters
4. Total Head: 30 meters
5. Motor Capacity: 01 HP
6. Power Requirement: 230V, AC, 50Hz.
7. Sump Tank Size: 1200 X 400 X 400 mm with ½” Drain Valve
8. Collecting Tank: 300 X 300 X 575 mm with Piezometer arrangement with 02″ Drain Valve
9. Tank Material: Stainless Steel, Grade- 304
10. Head Control: 01″ Gate Valve,
11. Piping System: 01″ UPVC Piping System
12. Suction Head Measurement: Vacuum Gauge, 4 ½” Dial, Range- 0-760 mmhg
13. Pressure Head Measurement: Pressure Gauge, 4 ½” Dial, Range- 0-7 Kg.
14. Power Measurement: Single Phase Energy Meter, 20A
15. Power Control: 32A DP Switch
Rigid MS framework compactly fitted with all the above items as a self-sufficient package unit, suitable for operation without any foundation.
